Tips from the Mullet Master

£0.00
Stock Status: In Stock

Tips from the Mullet Master (01.08.2022)
 
After fishing with Colin I just had to take the opportunity, on behalf of the many of you
out there who have an interest in the Mullet on a Fly scene, for an update on his very
latest thinking on the subject. So here it is – ‘straight from the horse’s mouth’....
 
 Leaders - Grand Max Soft Plus 0.218mm diameter. I have stopped quoting it as 10.4lb as some anglers, including well known guys, cannot seem to get their head around 10lb fluoro and size 12 flies. I use a 12-14 foot leader and always two flies, as three will tend to tangle in coastal winds. Spacing is 3 ft from point fly to dropper, which is tied short, to avoid tangles. 
 Flies - Each of the mullet patterns has a function with several created for specific circumstances and certain periods of the season but for general use I would look to tagged Romy's Sand Shrimps, tagged Spectra Shrimp, Ghostbusters, tagged Mullet Bachs and tagged Romy's Mud Shrimp for a day’s fishing. A good standard set up is a Romy's Sand Shrimp on the dropper and a Mullet Bach on the point. These flies take more than their fair share of mullet of all three species and make a good starting combo for mullet in general. If fish are feeding over silt
and show no reaction then replacing the Bach with a Romy's Mud Shrimp will often bring results. If I am specially targeting thick-lips then I fish a Romy's Sand Shrimp on the dropper and a Spectra Shrimp on the point. If the thicks fail to take the Sand shrimp on the drift, they will often respond to the Spectra on the subsequent retrieve. Effectively, you are doubling your chances. Recent new patterns such as the Shrimply Red and the Romy’s Buzzer incorporate a Globrite red tag as I suspect that fluorescent colours may attract mullet. The fluoro green butt on some
patterns is there to enhance the effect.                                                 
(See all the Mullet patterns here.)
 Retrieve - My standard retrieve is a short (18 inch), quick strip intended to imitate a fleeing Shrimp. It pays to vary the length and speed of retrieve if the mullet fail to show interest. When you feel a fish take it is vital to gently strip-strike in order to set the hook. Failure to do so inevitably leads to lost fish.
 Tides - Each location fishes differently in relation to tides. Some marks are more productive on the ebb while others perform better on the flood. Groundwork is required to determine where and when mullet feed at your chosen mark. Mullet are creatures of habit and generally feed at the same place at the same stage of the tide. Finding current is often key to finding feeding fish so determining where currents form at various stages of the tide is important. Intermediate tides are often best. Springs can expose huge areas of shore and drag mullet far from their normal feeding areas and the fish can hang offshore before returning on more gentle tides. Neaps can fail to produce much in the way of food carrying current and the fish become lethargic.
 More Tips for Success - Always use fluorocarbon. Nylon floats on the surface and spooks mullet. Look for feeding swans. Generally, mullet will feed on food items disturbed by Swan activity. Concentrate on fish which demonstrate feeding behaviour...fins and tails slicing through the surface, sides flashing silver, boils and splashes in a concentrated area.
Fish which move slowly in straight lines and are only loosely grouped rarely take a fly. Invest in decent polarised sunglasses to help spot fish which are feeding subsurface. Estuaries are by far the most productive marks to fish. Always have a tagged Romy's Sand Shrimp on the dropper!
So there you have it!

Information

Tips from the Mullet Master (01.08.2022)
 
After fishing with Colin I just had to take the opportunity, on behalf of the many of you
out there who have an interest in the Mullet on a Fly scene, for an update on his very
latest thinking on the subject. So here it is – ‘straight from the horse’s mouth’....
 
 Leaders - Grand Max Soft Plus 0.218mm diameter. I have stopped quoting it as 10.4lb as some anglers, including well known guys, cannot seem to get their head around 10lb fluoro and size 12 flies. I use a 12-14 foot leader and always two flies, as three will tend to tangle in coastal winds. Spacing is 3 ft from point fly to dropper, which is tied short, to avoid tangles. 
 Flies - Each of the mullet patterns has a function with several created for specific circumstances and certain periods of the season but for general use I would look to tagged Romy's Sand Shrimps, tagged Spectra Shrimp, Ghostbusters, tagged Mullet Bachs and tagged Romy's Mud Shrimp for a day’s fishing. A good standard set up is a Romy's Sand Shrimp on the dropper and a Mullet Bach on the point. These flies take more than their fair share of mullet of all three species and make a good starting combo for mullet in general. If fish are feeding over silt
and show no reaction then replacing the Bach with a Romy's Mud Shrimp will often bring results. If I am specially targeting thick-lips then I fish a Romy's Sand Shrimp on the dropper and a Spectra Shrimp on the point. If the thicks fail to take the Sand shrimp on the drift, they will often respond to the Spectra on the subsequent retrieve. Effectively, you are doubling your chances. Recent new patterns such as the Shrimply Red and the Romy’s Buzzer incorporate a Globrite red tag as I suspect that fluorescent colours may attract mullet. The fluoro green butt on some
patterns is there to enhance the effect.                                                 
(See all the Mullet patterns here.)
 Retrieve - My standard retrieve is a short (18 inch), quick strip intended to imitate a fleeing Shrimp. It pays to vary the length and speed of retrieve if the mullet fail to show interest. When you feel a fish take it is vital to gently strip-strike in order to set the hook. Failure to do so inevitably leads to lost fish.
 Tides - Each location fishes differently in relation to tides. Some marks are more productive on the ebb while others perform better on the flood. Groundwork is required to determine where and when mullet feed at your chosen mark. Mullet are creatures of habit and generally feed at the same place at the same stage of the tide. Finding current is often key to finding feeding fish so determining where currents form at various stages of the tide is important. Intermediate tides are often best. Springs can expose huge areas of shore and drag mullet far from their normal feeding areas and the fish can hang offshore before returning on more gentle tides. Neaps can fail to produce much in the way of food carrying current and the fish become lethargic.
 More Tips for Success - Always use fluorocarbon. Nylon floats on the surface and spooks mullet. Look for feeding swans. Generally, mullet will feed on food items disturbed by Swan activity. Concentrate on fish which demonstrate feeding behaviour...fins and tails slicing through the surface, sides flashing silver, boils and splashes in a concentrated area.
Fish which move slowly in straight lines and are only loosely grouped rarely take a fly. Invest in decent polarised sunglasses to help spot fish which are feeding subsurface. Estuaries are by far the most productive marks to fish. Always have a tagged Romy's Sand Shrimp on the dropper!
So there you have it!

Reviews
product review overlay image

Customer reviews

No reviews left yet
Write a review

No reviews have been left for this product, be the first to leave a review